Blackmagicdesign Pocket Cinema Camera 6K with Entaniya Fisheye HAL Image

Blackmagicdesign Pocket Cinema Camera 6K with Entaniya Fisheye HAL

We tested the installation of the Entaniya Fisheye HAL on Blackmagic Design Pocket Cinema Camera 6K.

The Blackmagicdesign Pocket Cinema Camera 6K is a small camera that can shoot 6K in high resolution and RAW.It’s such an excellent camera that many video creators use it.

This is why there are so many inquiries about whether or not the Entaniya Fisheye can be installed on the camera.

Blackmagic Pocket Cinema Camera 6K

Blackmagic Pocket Cinema Camera 6K

The Blackmagic Pocket Cinema Cameras are available in 4K and 6K, each with a different sensor size and lens mount format.

Pocket Cinema Camera 6K is EF mount

● Pocket Cinema Camera 4K: Micro Four Thirds
● Pocket Cinema Camera 6K: Canon EF mount

The Pocket Cinema Camera 4K is a Micro Four Thirds mount, so all of the Entaniya Fisheye HAL series can be installed. (* EF mount lenses and PL mount lenses can be attached via the mount converter.

Entaniya Fisheye mounted on Pocket Cinema Camera 6K is only available for some EF mount lenses

The Pocket Cinema Camera 6K is an EF mount, so only EF mount lenses can be attached to it.

Micro Four Thirds and E-mount lenses cannot be attached to EF mount cameras due to the short flange back of the lens.

PL mount lenses cannot be attached because there is no mount converter for EF mount.

This is the Entaniya Fisheye HAL series mounted on the Pocket Cinema Camera 6K and the EF mount is as follows.

● Entaniya Fisheye HAL 200 EF 6.0
● Entaniya Fisheye HAL 250 EF 4.3

EF mount lens that cannot be attached to Pocket Cinema Camera 6K

● Entaniya Fisheye HAL 250 EF 6.0
● Entaniya Fisheye HAL 200 EF 5.0 (6.0 modified)

The above lens is an EF mount, but it cannot be attached because the back part of the lens interferes with the light shielding filter inside the camera and the back part of the lens. (It is possible to install it if the internal shading filter is removed, but it is a modification at your own risk.

Installation test on the Blackmagic Pocket Cinema Camera 6K

HAL 250 EF 4.3

Pocket Cinema Camera 6K sensor size is 23.10mm x 12.99mm (Super 35)
The image circle size of the HAL 250 4.3 is 13.1 mm @ 180°.

With the HAL 250 EF 4.3, the vertical field of view is approximately 180°.
These are often used in the production of video for dome content such as planetariums.

If you expand it to Equirectangular format, you can get a resolution of about 7000×3500 since the resolution can use a full height of 6144 x 3456.

HAL 200 EF 6.0

When using the HAL 200 6.0, the vertical field of view is around 125 degrees.
4The four corners will be vignetting, but in 3728 x 3020 (3.7K 6:5 anamorphic) mode it will cover the sensor and can be used as an ultra-wide diagonal fisheye lens.

Sample Video

HAL 200 EF 6.0

HAL 250 EF 4.3

You can download the original data below.