Mounting the Entaniya Fisheye EF Mount Lens on the Z CAM E2

Information about mounting our lenses (Entaniya Fisheye HAL series) on the Z CAM E2 Flagship (E2-F8, E2-F6, E2-S6) cinema cameras.

Zcam E2 Flagship のマウント

Zcam E2 Flagshipの基本のマウントは下記の通り全てEFマウントです。

● Z CAM E2-F8 Full Frame 8K : EFマウント
● Z CAM E2-F6 Full Frame 6K : EFマウント
● Z CAM E2-S6 Super 35mm 6K : EFマウント

Mounting the Entaniya Fisheye HAL EF Mount Lenses

The Entaniya Fisheye HAL EF mount lens is designed with a protruding rear part of the lens.

As a result, it may not be possible to mount them on some standard EF mount cameras.

We have tested the Z CAM E2 Flagship (E2-F8, E2-F6, E2-S6) and found that the rear of the lens interferes with the internal frame of the EF mount, so it cannot be mounted on the Z CAM E2 EF mount cameras.

Entaniya Fisheye HAL EF mount lenses

● Entaniya Fisheye HAL 250 EF 6.0
● Entaniya Fisheye HAL 250 EF 4.3
● Entaniya Fisheye HAL 200 EF 6.0

To attach the above lens to the Z CAM E2 Flagship (E2-F8, E2-F6, E2-S6), you need to follow the instructions below.

How to avoid problems

Optional parts: Conversion to MFT (Micro Four Thirds) mount

For the Z CAM E2 Flagship (E2-F8, E2-F6, E2-S6), the mount is interchangeable and an MFT mount is available as an optional part.
First, use this optional part to convert the Z CAM E2 mount to MFT mount.

Z CAM Interchangeable Lens Mount for E2 Flagship Series (MFT Mount)|B&H

Mount conversion adapter: EF to MFT

To attach an EF mount lens to an MFT mount camera, use the EF-MFT conversion adapter.

EF to MFT conversion adapters are available from a variety of manufacturers. When making your selection, choose a conversion adapter that does NOT have electronic contacts.

The following adapters have been tested by us.

K&F Concept KF-EFM43
K&F Concept KF-EFM43.P

Entaniya Fisheye HAL EF mount lenses can be attached to the Z CAM E2 Flagship (E2-F8, E2-F6, E2-S6) by converting the camera mount to MFT and using the EF-MFT mount adapter on the lens side.

Sensor and image circle

Z CAM E2-F8

The sensor size of the Z CAM E2-F8 is 35.97 x 23.9 mm, which means that a full size sensor is used.

However, it seems that the inside of the sensor is actually used.

We will add more information about other cameras as soon as we can verify them.